| CHASSIS: |
Four Wheel, Formed Channel Frame,
Power Hydraulic Steering |
| ENGINE: |
33 HP Water Cooled Diesel (40 HP
Turbo Charged Optional) |
| FUEL CAPACITY: |
8.5 Gallons |
| INSTRUMENTS: |
Speedometer, Fuel gauge, Oil
Pressure Alarm Indicator, Hour Meter, Amp Indicator, Temperature Indicator, Pulse Pressure
Gauge, Head Lights |
| DRIVE: |
Hydrostatic with Servo Speed
Control-Flow Compensated |
| TIRES: |
Turf Track: Rear: 13 x 24; Front:
18 x 8.5: 6-10 psi Turf Pressure |
| WATER TANK: |
220 Gallons with a 12 inch Manway |
| TANK AGITATION |
12VDC Pump with In-Tank Jets |
| FILL FILTER: |
1 1/4" 50 Micron Filter with
1" Fill Hose ( 15 ft.) |
| HIGH PSI PUMP: |
Triplex 3500 PSI @ 8 GPM |
| INJECTORS: |
12 Granular Injection Ports on 4
inch Centers |
INJECTION
ASSEMBLY: |
Front/Rear Carriage 4 inch Turf
Rollers, Rear Brush Assembly, Electrically Controlled Hydraulic Lift system |
| HOPPER: |
3 Cubic Foot with Rotation Cog
Material Feed, 12 VDC Drive Motor with Adjustable Pulse Analog Controller. |
| CONTROLS: |
Pulse/System Pressure Gauge,
Bypass Control, Mechanical Pulse and Pressure Control, Multiple Accumulator System for
Shallow and Deep Liquid/Granular Placement, Pulse Sensor for Hopper Speed Control,
Hopper Rotation Direction Switch, Separate Hopper Calibration Control, High Pressure Pump
Rocker Switch, Agitation Pump ON/OFF Rocker Switch, Injection Assembly Lift/Float Rocker
Switch, Safety Pressure Relief Valve, Head Light Switch. |
| INJECTION DEPTH: |
Adjustable form 1/2 inch to 8
inches (Depends on Soil Type and Compaction) |
| INJECTION RATES: |
Granular Injection Can Be Set From 100 Grams To 30 Pounds Per 1000 Sq. Ft. (To 8
- 30 Pounds Requires Special Controls and Hopper) |
| SERVICE RATES: |
1000 Sq. Ft./ 30 Seconds @ Depth of 1/2 to 2 Inches;
1000 Sq. Ft./ 2 Minutes @ Depths of 6 to 8 inches |
AREA COVERAGE: |
43,000 Sq, Ft, Per Tank ( 220 Gal.
) at Shallow Depths |
| GRANULAR SIZE: |
Particle Size Can Vary From
(Powder) 1/32 To 7/32 Inch. |
INJECTABLE
PRODUCTS |
Granular Materials, Liquids,
Wettable Powders, Flowables, Polymers, Profiles. |
| DIMENSIONS: |
138" L X 74"W X
63"H |
| WEIGHT: |
Approximately 3300 Lbs. (Dry)
|
