| CHASSIS: |
Formed 11 Gauge Sheet Metal and
Square Tube Frame |
| ENGINE: |
20 Hp Electric Start, Air Cooled |
| FUEL CAPACITY: |
2.0 Gallons |
| INSTRUMENTS: |
Hour meter, Head Lights, Pulse
Pressure Gauge |
| DRIVE: |
Hydrostatic Transaxle, Integrated
Design and Sealed Construction, Maintenance Free Fluid Levels. |
| TIRES: |
Turf Tires: Rear: 18 x 6 ; Front:
13 x 6: 6-10 psi Turf Pressure |
| WATER FILTER: |
Optional Non-unit Mounted 1"
50 Micron Filter with Hose and Reel (200 ft.) |
| HIGH PSI PUMP: |
Triplex 3500 psi @ 5 GPM |
| INJECTORS: |
8 Granular Injection Ports on 4
inch Centers |
| HOPPERS: |
1.5 Cubic Foot with Rotation Cog
Material Feed, 12 VDC Drive Motor with Adjustable Pulse Analog Controller, Three Drive
Sprockets Available. |
| CONTROLS: |
Pulse/System Pressure Gauge,
Hopper Speed Control, Separate Hopper Calibration Control, Safety Pressure Relief Valve,
Mechanical Pulse and Pressure Control, Optional Multiple Accumulator System for Increasing
Injection Depths, Head Lights |
| SERVICE RATES: |
1000 Sq. Ft./ 1.3 Minutes @ Depth
of 1/2 to 2 Inches; 500 Sq. Ft./Min. @ Depth of 3 to 4 Inches |
| INJECTION RATES: |
Granular Injection Can Be Set From
100 Grams To 30 Pounds Per 1000 Sq. Ft. ( 8 to 30 Pounds Requires Special Controls and
Hopper) |
| INJECTION DEPTH: |
Adjustable From 1/2 Inch To 8
Inches (Depends on Soil Type and Compaction |
| GRANULAR SIZE: |
Particle Size Can Vary From
(Powder) 1/32 To 7/32 Inch |
INJECTABLE
PRODUCTS |
Liquids, Wettable Powders,
Flowables, Granular Materials, Polymers and Profiles |
DIMENSIONS |
76" L x 36" W x 51" H |
| WEIGHT |
Approximately 875 Lbs. |
